2.25 Boy’s Axe 24″

SU22B24C

2.25 lb. Dayton axe head outfitted with a 24″ curved hickory handle. Popularly referred to as a “boy’s” axe. A “mid” sized tool. Dayton pattern originated from the Dayton, Ohio, area.

Sheath Option
$44.95

  • Secure payments. Secure payments.
  • Free shipping with any order over $99. Free shipping with any order over $99.
  • Quality products. Quality products.
PayPal

The new Sport utility series from Council Tool.  This series has improvements over the red head axes.  The Sport utility upgades the wedge from the sometimes problematic aluminum wedge to a wooden wedge with round metal wedge.  The head is not ground after forging or heat treat, so has a rough finish and color left from heat treating.   The series also has greatly improved factory sharpening compared to the red head series.     

  • Hand sharpened, tapered bit for cutting and splitting.

  • ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition.

  • Head coated with boiled Linseed Oil over the as forged finish.

  • 24″ curved American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening.  Hafted high and proud.

  • Axe head is hydraulically seated onto handle and secured with a traditional double wedge system.

  • The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/4″ of overall length of the handle is removed during assembly

  • Sheath not included.

SU22B24C

You might also like