Hinderer

Subcategories

Active filters

  • Hinderer Knives Vintage...

    $465.00

    The XM-18 is known the world over as one of the toughest tactical folders regardless of your mission. Rick's focus when designing the XM-18 was a no-nonsense tactical tool ready for the simplest cutting tasks to high-speed low drag operations. Serial number V0933.

     It's available in a 3" model, a 3.5" model, and the 4" model is designated the XM-24. This Vintage Walnut XM-18 is a 3" spear point flipper variation with a black Parkerized finish on the O-1 tool steel blade and special green anodized working finish lockside, pocket clip, and filler tab. The Gen 6 model incorporates a ball bearing pivot for supremely smooth flipping action and also includes a set of regular washers that can be installed if you so choose.

    Out of stock
  • Hinderer Knives Tri-Way...

    $425.00

    This XM-18 flipper has a 3.5" slicer blade with a Stonewashed finish. The handle has a OD Green colored G-10 scale and titanium frame lock with the Hinderer lockbar stabilizer and a reversible right-hand carry pocket clip.

    The XM-18 is known the world over as one of the toughest tactical folders regardless of your mission. Rick's focus when designing the XM-18 was a no-nonsense tactical tool ready for the simplest cutting tasks to high-speed low drag operations. 

     

  • Hinderer Knives Tri-Way...

    $425.00

    This XM-18 flipper has a 3.5" slicer blade with a Stonewashed finish. The handle has a Red colored G-10 scale and titanium frame lock with the Hinderer lockbar stabilizer and a reversible right-hand carry pocket clip.

    The XM-18 is known the world over as one of the toughest tactical folders regardless of your mission. Rick's focus when designing the XM-18 was a no-nonsense tactical tool ready for the simplest cutting tasks to high-speed low drag operations. 

     

  • Hinderer Knives Tri-Way...

    $425.00

    This XM-18 flipper has a 3.5" slicer blade with a Stonewashed finish. The handle has a Black colored G-10 scale and titanium frame lock with the Hinderer lockbar stabilizer and a reversible right-hand carry pocket clip.

    The XM-18 is known the world over as one of the toughest tactical folders regardless of your mission. Rick's focus when designing the XM-18 was a no-nonsense tactical tool ready for the simplest cutting tasks to high-speed low drag operations. 

     

  • Hinderer Knives Tri-Way...

    $425.00

    This XM-18 flipper has a 3.5" slicer blade with a Stonewashed finish. The handle has a Blue colored G-10 scale and titanium frame lock with the Hinderer lockbar stabilizer and a reversible right-hand carry pocket clip.

    The XM-18 is known the world over as one of the toughest tactical folders regardless of your mission. Rick's focus when designing the XM-18 was a no-nonsense tactical tool ready for the simplest cutting tasks to high-speed low drag operations. 

     

  • Hinderer Knives Tri-Way...

    $425.00

    This XM-18 flipper has a 3.5" slicer blade with a Stonewashed finish. The handle has a Orange colored G-10 scale and titanium frame lock with the Hinderer lockbar stabilizer and a reversible right-hand carry pocket clip.

    The XM-18 is known the world over as one of the toughest tactical folders regardless of your mission. Rick's focus when designing the XM-18 was a no-nonsense tactical tool ready for the simplest cutting tasks to high-speed low drag operations. 

     

  • Rick Hinderer Knives Ranch...

    $350.00

    The specs of this knife will convince you that it will be an amazingly comfortable and capable hard use knife. The blade is 5.25" of 0.1875" thick CPM-3V tool steel and with an overall length of 10.5". The superb overall balance is augmented even further by the 3D contoured handles which fill the hands in just the right areas. The flat grind rises up over an inch on the blade which gives it a fantastic slicing profile while still leaving enough steel behind the edge for toughness in the cut! The upswept tip and top swedge allow for the very fine blade tip manipulation that is needed for around the ranch and hunting chores. And speaking of blade tip control, that is helped out even more by the "pinky" groove in the underside of the handle. 

  • Hinderer 3" XM-18 Skinny...

    $375.00

    Meet the Skinny, a slimmer version of the well received XM-18 with its G-10 handle, Tri-Way Pivot and even thinner blade.

  • Hinderer XM-18 3" Skinny...

    $375.00

    This XM-18 Skinny model offers a slimmer EDC build with a black G-10 scale, black stonewashed titanium frame, and a black stonewashed slicer blade.

    Hinderer's XM-18 3.5" Gen 6 enhances the standard formula with the addition of the Tri-Way Pivot System. The system allows the use of bearings, phosphor bronze washers, or teflon washers in the pivot depending on preference. The XM-18 Gen 6 is outfitted with a stainless steel lockbar insert, the Hinderer Lockbar Stabilizer, and a reversible pocket clip for right side carry.

  • Hinderer 3" XM-18 Skinny...

    $375.00

    This XM-18 Skinny model offers a slimmer EDC build with a black G-10 scale, grey stonewashed titanium frame, and a grey stonewashed slicer blade.

    Hinderer's XM-18 3.5" Gen 6 enhances the standard formula with the addition of the Tri-Way Pivot System. The system allows the use of bearings, phosphor bronze washers, or teflon washers in the pivot depending on preference. The XM-18 Gen 6 is outfitted with a stainless steel lockbar insert, the Hinderer Lockbar Stabilizer, and a reversible pocket clip for right side carry.Meet the Skinny, a slimmer version of the well received XM-18 with its G-10 handle, Tri-Way Pivot and even thinner blade.

  • Hinderer XM-18 3" Spear...

    $375.00

    This Hinderer folding knife features a G-10 handle with a titanium liner and Tri-Way Pivot System while sporting an impressive 3” 20CV Spear Point blade.

    Out of stock
  • Hinderer 3" Eklipse -...

    $375.00

    Thinned down version of the classic Hinderer Eklipse. The handle is made of G-10 on both sides, with a titanium liner on the front and a heavy titanium liner on the lock side. 

    Note: Hardware for this knife is specific to the 3" version, and is not compatible with Eklipse hardware that fits the original 3.5" model.

    This knife features the Tri-Way Pivot System. The knife is pre-installed with bearings, and also includes phosphor bronze and teflon washers.